advantage of liquid centrifugal separators | presented by E&W Industrial Service Asia Co., Ltd.




A good spin on separation performance ?

The fluid-dynamically designed accelerator hub and the big effective flow radius help applying the high rotor accelerations of up to 2.000 g effectively on the liquid and the particles to be separated. This is why STA Separators reach significant grade efficiencies for particles down to 1 to 3 µm. For high flow rates up to 250 l/min strong drives are selected accordingly.

It’s running already?

So quiet you wonder why it’s not running. Thanks to its direct drive and the silicon sand filled double casing the separator generates a very low noise level; only 70 dB(A) on the model S-15. Sound-damping housings are rarely necessary.
  


Not afraid of hot acid

STA Separators are available in different material pairings. For demanding applications in medical or food-related industry, or for use with hot and chemically aggressive media all models can be stainless steel built, in both 304 and 316 Ti alloy, accordingly combined with special sealing materials.

Right and Tight

the high acceleration forces also result in an optimum compression of the separated solids. The sludge is dry and can be reasonably disposed or even recycled. 

A matter of mud

If you decide to go for a centrifugal separator as your separating system, most parameters relevant to filtration, such as shape and composition of the solids, become forgettable. Unfilterable additives like greases and polish, or those problematic ingredients in cast alloys namely graphite and silicon just get removed as well. More examples: chlorinated drawing oils, molybdenum, scales, paint sludge, phosphates, organic slurries, … 
Location: Thailand

Comments

Post a Comment

Popular posts from this blog

separation of Coolant lubricant by STA prenseted by E&W Industrial Service Asia Co., Ltd.

Image
At Progress-Werke Oberkirch, a subcontractor to the automobile industry, deep-drawn parts are manufactured from carbon or galvanized steels. A problem arose on 2 Müller-Weingarten presses in which the cooling lubricant emulsion had to be changed every week due to the increased concentration of foreign oils and fine contamination. In addition, employees were suffering from skin irritations. A belt filter which was already in use on the installation did not improve cleaning performance adequately. A water-miscible cooling lubricant (emulsion, added in a quantity of 8 – 12 %) is used at a temperature of 30° C, the volume is about 1,000 l. The emulsion is contaminated with hydraulic oil, belt greasing oil and fine abrasion particles. Solutions / Realization STA installed a combination bath maintenance system, which consisted of an NZ-50 centrifuge separator and a DPS-350 oil separator in the bypass on the belt filter. The feed pump uses a surface suction system to force ...
Read more

Validation of Ultrasonic Cleaners

Image
what is the meaning of ultrasonic validation ? Validation is a process of demonstrating, through documented evidence, that a process, procedure, method, piece of equipment, or facility will consistently produce a product or result that meets predetermined specifications and quality attributes Establishing the process of fulfill for purpose. how this can be accomplished ? there are several methods to test ultrasonic systems, one of them is the cavimeter of Elma Schmidbauer GmbH  the elma cavimeter is measuring the cavitation noise figure. to get precise measuring data it is important to measure the ultrasonic cleaner when it is new. With this measurement you got reliable data's as reference which can be used to compare all future measurements.  according to previous studies of Elma this phenomena shows: effect of cavitation in ultrasound DISCUSSION & CONCLUSIONS have been made:  It has been generally accepted t...
Read more