Steam cleaning - Elmasteam

the advantage of steam cleaning


Steam cleaning can be used in the following business fields:


  1. Jewellery Manufacturing / Production
  2. Jewellery Shops
  3. Watch Repair shops
  4. Watch Service Center 
  5. Hospitals
  6. CSSD in Hospitals
  7. Industry
  8. Dental Pratice


we offer 2 different steam cleaner versions , both version are available with several options as followed




left side
the elmasteam 4.5

right side
the elmasteam 8.0
Location: Bangkok, Thailand

Comments

Post a Comment

Popular posts from this blog

multi frequency ultrasonic cleaner- what does it mean ? | presented by E&W Industrial Service Asia Co.,Ltd.

multi frequency ultrasonic cleaners are ultrasonic cleaner which can be operated with different kind frequency's in the same tank. in general different frequencies are created by the transducers. for example a low frequency for the rough cleaning or pre-cleaning step and a high frequency for the fine cleaning step. there are different kinds of Brand Names and NO Brand names on the market. Some of them they create low and high frequencies even at the same time, somehow our Partner Company Elma has done several test in their Lab during this test 2 different frequency's has been operated in the same tank at the same time. Obviously during this test the Experts of Elma even thought that this 2 frequency's may disturb each other then bringing better cleaning results. somehow this is depending on so many conditions, for example on the kind of product and as well on the contamination, may cleaning test can provide helpful information in advanc...
Read more

separation of Coolant lubricant by STA prenseted by E&W Industrial Service Asia Co., Ltd.

Image
At Progress-Werke Oberkirch, a subcontractor to the automobile industry, deep-drawn parts are manufactured from carbon or galvanized steels. A problem arose on 2 Müller-Weingarten presses in which the cooling lubricant emulsion had to be changed every week due to the increased concentration of foreign oils and fine contamination. In addition, employees were suffering from skin irritations. A belt filter which was already in use on the installation did not improve cleaning performance adequately. A water-miscible cooling lubricant (emulsion, added in a quantity of 8 – 12 %) is used at a temperature of 30° C, the volume is about 1,000 l. The emulsion is contaminated with hydraulic oil, belt greasing oil and fine abrasion particles. Solutions / Realization STA installed a combination bath maintenance system, which consisted of an NZ-50 centrifuge separator and a DPS-350 oil separator in the bypass on the belt filter. The feed pump uses a surface suction system to force ...
Read more