centrifuge separator STA-A25
Popular posts from this blog
separation of Coolant lubricant by STA prenseted by E&W Industrial Service Asia Co., Ltd.
At Progress-Werke Oberkirch, a subcontractor to the automobile industry, deep-drawn parts are manufactured from carbon or galvanized steels. A problem arose on 2 Müller-Weingarten presses in which the cooling lubricant emulsion had to be changed every week due to the increased concentration of foreign oils and fine contamination. In addition, employees were suffering from skin irritations. A belt filter which was already in use on the installation did not improve cleaning performance adequately. A water-miscible cooling lubricant (emulsion, added in a quantity of 8 – 12 %) is used at a temperature of 30° C, the volume is about 1,000 l. The emulsion is contaminated with hydraulic oil, belt greasing oil and fine abrasion particles. Solutions / Realization STA installed a combination bath maintenance system, which consisted of an NZ-50 centrifuge separator and a DPS-350 oil separator in the bypass on the belt filter. The feed pump uses a surface suction system to force ...
industrial part cleaning in motion | presented by E&W Industrial Service Asia Co., Ltd.
Comments
Post a Comment